page: 8 type 0402 0603 0805 1206 1210 2512 4020 power rating ( w ) 1 0.050 0.1 0.125 0.25 0.35 1.00 2 1.50 2 working voltage ( vac ) trimmed 30 75 100 200 300 1000 4000 un-trimmed (> 5%) 60 150 200 400 600 2000 6000 resistance range ( w ) tolerances available ( % ) temperature coeffcients available ( ppm/c ) voltage coeffcients available ( ppm / v ) 10m - 100m 5 to 20% 50, 100 500ppm/v 1 to 20% 50, 100 500ppm/v 0.5 to 20% 50, 100 500ppm/v 0.5% to 20% 25, 50, 100 250ppm/v 0.5% to 20% 25, 50, 100 50ppm/v 0.5% to 20% 25, 50, 100 25ppm/v 0.25% to 10% 25, 50, 100 10ppm/v >100m - 500m 5% to 20% 100, 250 1000ppm/v 2% to 20% 100, 250 500ppm/v 2% to 20% 100, 250 500ppm/v 2% to 20% 50, 100, 250 500ppm/v 2% to 20% 50, 100, 250 250ppm/v 1% to 20% 25, 50, 100 50ppm/v 0.5% to 20% 25, 50, 100 25ppm/v >500m - 1g 5% to 20% 250, 500 1000ppm/v 5% to 20% 250, 500 1000ppm/v 5% to 20% 250, 500 1000ppm/v 5% to 20% 100, 250 1000ppm/v 5% to 20% 100, 250 250ppm/v 1% to 20% 100, 250 50ppm/v 1% to 20% 25, 50, 100 25ppm/v >1g - 10g 10% to 30% 2000 2000ppm/v 5% to 30% 500, 1000 2000ppm/v 5% to 20% 500, 1000 2000ppm/v 5% to 20% 500, 1000 2000ppm/v 5% to 20% 250, 500 500ppm/v 2% to 20% 250, 500 100ppm/v 2% to 20% 50, 100 50ppm/v >10g - 100g 10% to 30% 3000 5000ppm/v 10% to 30% 2000, 3000 5000ppm/v 10% to 30% 2000, 3000 5000ppm/v 10% to 30% 1000, 2000 2000ppm/v 5% to 20% 500, 1000 1000ppm/v 5% to 20% 250, 500 250ppm/v 5% to 30% 100, 250 100ppm/v >100g - 1t on request on request see hvs see hvs 10% to 30% 1000, 2000 2000ppm/v 10% to 20% 500, 1000 500ppm/v 10% to 30% 500 / 1000 500ppm/v hvc series ? resistances from 10m to 1t ohms ? power rating 0.05 to 1.5 watts ? resistance tolerances to 0.25% ? tcrs to 25 ppm/c ? non-magnetic ? high value thick film resistance element ? sizes, 0402, 0603, 0805, 1206, 1210, 2512, 4020 ? special ht version to 300c specifications high resistance, thick film chip resistors 1) solder pads must have suffcient heat conduction 2) tcr in ppm/k; +25c to +125c; tcr below standard tcr (highest value) and values >100g; +25c to +85c 3) vcr: typical values, all negative, not for all tcr values available riedon inc. 300 cypress avenue alhambra ca 91801 (626) 284-9901 (626) 284-1704 www.riedon.com 06/13
page: 9 specifcation value temperature range -55c to +155c (standard) -55c to +300c (ht version, tcr valid +25c to +125c ) climactic cetegory 55 / 155 / 56 solderability 250c, 3s max. soldering temperature 260c, 10s long term stability max dr <1 gw 1 gw - 10 gw >10 gw storage 125c, 1000h <1% <2% <5% load life 70c, 1000h <0.5% <1% <2% maximum voltage, 1000h <0.5% <1% <2% hvc series high resistance, thick film chip resistors 0 25 50 75 100 125 150 175 0 20 40 60 80 100 120 power ( % ) ambient temperature power derating curve type dimensions l b d c hvc 0402 0.040 0.002 [ 1.04 0.05 ] 0.020 0.002 [ 0.5 0.05 ] 0.012 0.002 [ 0.3 0.05 ] 0.004 +0.004 / -0.002 [ 0.1 +0.1 / -0.05 ] hvc 0603 0.060 +0.006 / -0.002 [ 1.5 +0.15 / -0.05 ] 0.030 +0.008 / -0.002 [ 0.8 +0.2 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.008 +0.008 / -0.004 [ 0.2 +0.2 / -0.1 ] hvc 0805 0.080 +0.006 / -0.002 [ 2.0 +0.15 / -0.05 ] 0.050 +0.006 / -0.002 [ 1.25 +0.15 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.012 +0.008 / -0.004 [ 0.3 +0.2 / -0.1 ] hvc 1206 0.126 +0.006 / -0.002 [ 3.2 +0.15 / -0.05 ] 0.060 +0.008 / -0.002 [ 1.5 +0.2 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.012 +0.008 / -0.004 [ 0.3 +0.2 / -0.1 ] hvc 1210 0.126 +0.006 / -0.002 [ 3.2 +0.15 / -0.05 ] 0.098 +0.008 / -0.002 [ 2.5 +0.2 / -0.05 ] 0.020 +0.006 / -0.002 [ 0.5 +0.15 / -0.05 ] 0.032 0.008 [ 0.8 0.2 ] hvc 2512 0.250 +0.006 / -0.002 [ 6.3 +0.15 / -0.05 ] 0.138 +0.008 / -0.002 [ 3.5 +0.2 / -0.05 ] 0.024 +0.006 / -0.002 [ 0.6 +0.15 / -0.05 ] 0.035 0.008 [ 0.9 0.2 ] hvc 4020 0.400 +0.006 / -0.002 [ 10.2 +0.15 / -0.05 ] 0.200 +0.008 / -0.002 [ 5.1 +0.2 / -0.05 ] 0.024 +0.006 / -0.002 [ 0.6 +0.15 / -0.05 ] 0.035 0.008 [ 0.9 0.2 ] packaging: bulk or blistertape to iec 60286-3 tape width 8mm / reel diameter 180 or 330mm minimum quantity bulk / 100 pieces per value minimum quantity tape & reel / 1000 pieces per value ordering information part description: part type - resistance - tolerance - tcr - packaging example: hvc 0603 100m ohms 5% 50ppm tape ( note: if no tcr is specifed, the highest value will be supplied ) riedon inc. 300 cypress avenue alhambra ca 91801 (626) 284-9901 (626) 284-1704 www.riedon.com 06/13
|
